{ "store": "Industry Tools Company UK", "website": "https://industrytoolsonline.co.uk", "currency": "GBP", "count": 19, "products": [ { "id": "concrete-cut-saw", "sku": "Hand-Concrete-Saw", "title": "Concrete Cut Saw", "slug": "concrete-cut-saw", "price": 1349, "currency": "GBP", "availability": "in_stock", "category": "cutting-tools", "category_label": "Cutting Tools", "tags": [ "concrete saw", "cutting", "power cutter", "construction" ], "colors": [], "materials": [ "Cast magnesium crankcase" ], "dimensions": "61 cm x 22.5 cm x 41.5 cm", "weight": "10.2 kg", "images": [ "https://industrytoolsonline.co.uk/dropship-images/cutting-tools/concrete-cut-saw/main-concrete-cut-saw.jpeg", "https://industrytoolsonline.co.uk/dropship-images/cutting-tools/concrete-cut-saw/concrete-cut-saw-2.png", "https://industrytoolsonline.co.uk/dropship-images/cutting-tools/concrete-cut-saw/concrete-cut-saw-3.png", "https://industrytoolsonline.co.uk/dropship-images/cutting-tools/concrete-cut-saw/concrete-cut-saw-4.png" ], "description_short": "10.2 kg, a 35.6 cm blade, 12.7 cm maximum depth, semi-automatic belt tensioning and a cast magnesium crankcase on a three-bolt joint.", "description": "A handheld cutter earns its place because it goes to the work. That is also why it is the one that hurts people: it is held rather than guided, and it is used in places a floor saw cannot reach.\n\nPlan the cut before starting the engine. Know what is inside the slab. Reinforcement is expected; a live conduit or a water pipe is not, and a scan is quicker than the alternative.\n\nScore, then deepen. A shallow first pass gives the blade a track to run in, and a blade that has a track does not wander. Trying to reach full depth in one pass is what puts the blade in a bind.\n\nBind is the hazard to understand. If the cut closes on the blade, the saw kicks back along the line of the cut. Support both sides of the piece being removed, and cut so the offcut falls away rather than pinching.\n\nDust is the other one. Cutting concrete dry produces respirable crystalline silica, and the dose is cumulative. Cut wet where you can, use on-tool extraction where you cannot, and wear a mask rated for fine dust either way.\n\nBlades wear. A blade whose segments are down is slower, hotter and more likely to glaze, and a glazed blade rubs rather than cuts. Change it when it is worn rather than when the job ends.\n\nLet it idle down before shutting off, and clean the filter and the belt guard. Most cutters that die early die of dust rather than of work.", "llm_summary": "Concrete Cut Saw sold by Industry Tools Company UK at industrytoolsonline.co.uk. A handheld power cutter for concrete, masonry and asphalt. 5 HP at 10.2 kg, a 35.6 cm blade, 12.7 cm cutting depth, semi-automatic belt tensioning. Price GBP 1349, reference price GBP 1699. Product dimensions: 61 cm x 22.5 cm x 41.5 cm. Weight: 10.2 kg. Output power: 5 HP. Maximum blade diameter: 35.6 cm. Maximum cutting depth: 12.7 cm. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/concrete-cut-saw", "canonical_url": "https://industrytoolsonline.co.uk/concrete-cut-saw", "json_url": "https://industrytoolsonline.co.uk/api/products/concrete-cut-saw.json", "updated_at": "2026-09-03", "compare_at_price": 1699, "description_text": "A handheld cutter earns its place because it goes to the work. That is also why it is the one that hurts people: it is held rather than guided, and it is used in places a floor saw cannot reach. Plan the cut before starting the engine. Know what is inside the slab. Reinforcement is expected; a live conduit or a water pipe is not, and a scan is quicker than the alternative. Score, then deepen. A shallow first pass gives the blade a track to run in, and a blade that has a track does not wander. Trying to reach full depth in one pass is what puts the blade in a bind. Bind is the hazard to understand. If the cut closes on the blade, the saw kicks back along the line of the cut. Support both sides of the piece being removed, and cut so the offcut falls away rather than pinching. Dust is the other one. Cutting concrete dry produces respirable crystalline silica, and the dose is cumulative. Cut wet where you can, use on-tool extraction where you cannot, and wear a mask rated for fine dust either way. Blades wear. A blade whose segments are down is slower, hotter and more likely to glaze, and a glazed blade rubs rather than cuts. Change it when it is worn rather than when the job ends. Let it idle down before shutting off, and clean the filter and the belt guard. Most cutters that die early die of dust rather than of work." }, { "id": "compact-swage-tool-kit", "sku": "Compact-Swage-Tool-Kit", "title": "Compact Swage Tool Kit", "slug": "compact-swage-tool-kit", "price": 559, "currency": "GBP", "availability": "in_stock", "category": "fastening-tools", "category_label": "Fastening Tools", "tags": [ "swage tool", "hvac", "hydraulic", "fastening" ], "colors": [], "materials": [ "Hydraulic tool with interchangeable heads" ], "dimensions": "Pistol form, 3.86 kg", "weight": "3.86 kg", "images": [ "https://industrytoolsonline.co.uk/dropship-images/fastening-tools/compact-swage-tool-kit/main-compact-swage-tool-kit.jpeg", "https://industrytoolsonline.co.uk/dropship-images/fastening-tools/compact-swage-tool-kit/compact-swage-tool-kit-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/fastening-tools/compact-swage-tool-kit/compact-swage-tool-kit-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/fastening-tools/compact-swage-tool-kit/compact-swage-tool-kit-4.jpg" ], "description_short": "One-handed hydraulic operation at 3.86 kg, with a release trigger and a deburring tool in the kit.", "description": "A swaged joint is a good joint because it has less in it. One seam instead of a coupling with two, and nothing extra to buy on the van.\n\nCut square. A tube cutter, not a hacksaw, and take the last turns gently so the wall is not pinched in. A tube that is out of round before the swage will be out of round after it.\n\nDeburr inside and out. This is the step people skip and it is the one that leaks. The inside burr scores the mating face as the tube goes together and gives the braze a path to nowhere.\n\nMatch the head to the tube. A head one size out either does not grip or expands too far, and both leave a thin wall at the shoulder.\n\nSupport the tube. Swaging pushes; a tube that is free to move takes the push instead of the expansion, and the swage ends up short.\n\nGo in square and take it in one movement. Hydraulic tools do this for you, which is the whole reason for using one over a hand expander on anything above the small sizes.\n\nCheck the depth. The swage has to be deep enough for the next tube to seat and for the braze to have a run, and too deep thins the wall at the shoulder.\n\nClean before brazing. Everything that goes into the joint comes out in it.", "llm_summary": "Compact Swage Tool Kit sold by Industry Tools Company UK at industrytoolsonline.co.uk. A one-handed hydraulic swage tool for expanding tubing from 8 mm to 41 mm. Pistol form at 3.86 kg with a release trigger, and a deburring tool in the kit. Price GBP 559, reference price GBP 669. Swaging range: 8 mm to 41 mm tubing. Operation: Hydraulic, one-handed, release trigger. Weight: 3.86 kg. Form: Pistol design for confined access. Included: Swage heads and a deburring tool. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/compact-swage-tool-kit", "canonical_url": "https://industrytoolsonline.co.uk/compact-swage-tool-kit", "json_url": "https://industrytoolsonline.co.uk/api/products/compact-swage-tool-kit.json", "updated_at": "2026-09-03", "compare_at_price": 669, "description_text": "A swaged joint is a good joint because it has less in it. One seam instead of a coupling with two, and nothing extra to buy on the van. Cut square. A tube cutter, not a hacksaw, and take the last turns gently so the wall is not pinched in. A tube that is out of round before the swage will be out of round after it. Deburr inside and out. This is the step people skip and it is the one that leaks. The inside burr scores the mating face as the tube goes together and gives the braze a path to nowhere. Match the head to the tube. A head one size out either does not grip or expands too far, and both leave a thin wall at the shoulder. Support the tube. Swaging pushes; a tube that is free to move takes the push instead of the expansion, and the swage ends up short. Go in square and take it in one movement. Hydraulic tools do this for you, which is the whole reason for using one over a hand expander on anything above the small sizes. Check the depth. The swage has to be deep enough for the next tube to seat and for the braze to have a run, and too deep thins the wall at the shoulder. Clean before brazing. Everything that goes into the joint comes out in it." }, { "id": "allen-wrench-sets", "sku": "Master-Wrench-Key-Set", "title": "Allen Wrench Set", "slug": "allen-wrench-sets", "price": 69, "currency": "GBP", "availability": "in_stock", "category": "hand-tools", "category_label": "Hand Tools", "tags": [ "hex keys", "allen keys", "torx", "hand tools" ], "colors": [], "materials": [ "S2 alloy steel, heat treated, manganese phosphate coated" ], "dimensions": "3 cm x 17.9 cm x 28 cm", "weight": "1.25 kg", "images": [ "https://industrytoolsonline.co.uk/dropship-images/hand-tools/allen-wrench-sets/main-allen-wrench-sets.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/allen-wrench-sets/allen-wrench-sets-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/allen-wrench-sets/allen-wrench-sets-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/allen-wrench-sets/allen-wrench-sets-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/allen-wrench-sets/allen-wrench-sets-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/allen-wrench-sets/allen-wrench-sets-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/allen-wrench-sets/allen-wrench-sets-7.jpg" ], "description_short": "Heat-treated S2 alloy steel with a manganese phosphate coating, ball ends for 25 degree entry, and laser-etched sizes in a marked holder.", "description": "A rounded socket head is one of the more annoying failures in a workshop, and it is almost always a tool choice rather than a torque problem.\n\nGet the size right. Metric and imperial hex sizes run close enough together that an imperial key will go into the next metric socket and feel almost right. That is the single most common way a head gets rounded.\n\nClean the socket first. Old paint, thread lock and packed dirt keep the key from seating fully, and a key that is only half in is a key that is working on the top corners of the socket.\n\nSeat the key fully before turning. If you can see any of the flats above the surface, it is not in far enough.\n\nUse the straight end for force. Ball ends are for reach: the ball touches on a smaller area, so all the load goes through less metal. Spin a fastener down on the ball, tighten on the straight leg.\n\nUse the long arm as the lever when you need torque, and the short arm as the lever when you need to get in. The set gives you both ends of that choice.\n\nPush, then turn. Pressure into the socket keeps the key seated; turning without it is what lets the key climb out.\n\nIf it starts to round, stop and change tactics. A slightly oversized Torx driven into a rounded hex socket will often turn it, and an extractor is the next step after that. Carrying on with the same key only rounds it further.", "llm_summary": "Allen Wrench Set sold by Industry Tools Company UK at industrytoolsonline.co.uk. A 35 piece long arm ball end hex and Torx key set in heat treated S2 alloy steel. 13 metric, 13 SAE and 9 Torx keys, manganese phosphate coated, laser etched sizes. Price GBP 69, reference price GBP 99. Pieces: 35 hex and Torx keys. Breakdown: 13 metric hex, 13 SAE hex, 9 Torx or star. Material: S2 alloy steel, heat treated. Coating: Manganese phosphate. Ends: Ball end, up to 25 degrees of entry angle. Item weight: 1.25 kg. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/allen-wrench-sets", "canonical_url": "https://industrytoolsonline.co.uk/allen-wrench-sets", "json_url": "https://industrytoolsonline.co.uk/api/products/allen-wrench-sets.json", "updated_at": "2026-09-03", "compare_at_price": 99, "description_text": "A rounded socket head is one of the more annoying failures in a workshop, and it is almost always a tool choice rather than a torque problem. Get the size right. Metric and imperial hex sizes run close enough together that an imperial key will go into the next metric socket and feel almost right. That is the single most common way a head gets rounded. Clean the socket first. Old paint, thread lock and packed dirt keep the key from seating fully, and a key that is only half in is a key that is working on the top corners of the socket. Seat the key fully before turning. If you can see any of the flats above the surface, it is not in far enough. Use the straight end for force. Ball ends are for reach: the ball touches on a smaller area, so all the load goes through less metal. Spin a fastener down on the ball, tighten on the straight leg. Use the long arm as the lever when you need torque, and the short arm as the lever when you need to get in. The set gives you both ends of that choice. Push, then turn. Pressure into the socket keeps the key seated; turning without it is what lets the key climb out. If it starts to round, stop and change tactics. A slightly oversized Torx driven into a rounded hex socket will often turn it, and an extractor is the next step after that. Carrying on with the same key only rounds it further." }, { "id": "auto-mechanics-tool-set", "sku": "258-Piece-Tool-Kit", "title": "Auto Mechanics Tool Set", "slug": "auto-mechanics-tool-set", "price": 239, "currency": "GBP", "availability": "in_stock", "category": "hand-tools", "category_label": "Hand Tools", "tags": [ "tool kit", "mechanics", "sockets", "hand tools" ], "colors": [], "materials": [ "Forged steel with chromium plating" ], "dimensions": "Rolling case with layered trays", "weight": "Heavy", "images": [ "https://industrytoolsonline.co.uk/dropship-images/hand-tools/auto-mechanics-tool-set/main-auto-mechanics-tool-set.jpeg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/auto-mechanics-tool-set/auto-mechanics-tool-set-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/auto-mechanics-tool-set/auto-mechanics-tool-set-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/auto-mechanics-tool-set/auto-mechanics-tool-set-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/auto-mechanics-tool-set/auto-mechanics-tool-set-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/auto-mechanics-tool-set/auto-mechanics-tool-set-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/auto-mechanics-tool-set/auto-mechanics-tool-set-7.jpg" ], "description_short": "Chrome-plated forged steel, sockets in both metric and inch, hand tools, screwdrivers and bits, in trays with cushioning between the layers.", "description": "The measure of a tool set is not how many pieces it has on the day it arrives. It is how many it has two years later.\n\nLayout is what decides that. A tray with a shaped position for every tool shows you a gap from across the garage. A bag shows you nothing until the job stops.\n\nCheck the coverage rather than the count. Piece counts are inflated by bits and by sockets in sizes nobody uses. What matters is whether both drive sizes are there, whether metric and inch are both covered, and whether the deep sockets and the extensions are included.\n\nBoth systems matter on vehicles. Fasteners on one car are often not all from one standard, and having to stop for a single size is the whole argument for a set.\n\nFinish is about maintenance, not looks. Chromium plating sheds oil and resists corrosion, but no finish survives being put away wet. Wipe tools before they go back in.\n\nWheels beat a handle. A set of this size is heavy, and a case that has to be carried is a case that stays where it is.\n\nTake the trays out when you start a big job. Working out of the tray on the floor beside you is faster than reaching into a case, and it makes the tidy-up an inventory check.", "llm_summary": "Auto Mechanics Tool Set sold by Industry Tools Company UK at industrytoolsonline.co.uk. A 258 piece mechanics tool set in a rolling case. Chrome plated forged steel, metric and inch sockets in two drive sizes, layered trays. Price GBP 239, reference price GBP 279. Pieces: 258. Material: Premium forged steel, chromium plated. Case: Rolling case with two wheels and layered trays. Drive sizes: 12 mm (1/2 inch) and 7 mm (1/4 inch). Wrenches: 10 combination wrenches, 16 hex key wrenches. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/auto-mechanics-tool-set", "canonical_url": "https://industrytoolsonline.co.uk/auto-mechanics-tool-set", "json_url": "https://industrytoolsonline.co.uk/api/products/auto-mechanics-tool-set.json", "updated_at": "2026-09-03", "compare_at_price": 279, "description_text": "The measure of a tool set is not how many pieces it has on the day it arrives. It is how many it has two years later. Layout is what decides that. A tray with a shaped position for every tool shows you a gap from across the garage. A bag shows you nothing until the job stops. Check the coverage rather than the count. Piece counts are inflated by bits and by sockets in sizes nobody uses. What matters is whether both drive sizes are there, whether metric and inch are both covered, and whether the deep sockets and the extensions are included. Both systems matter on vehicles. Fasteners on one car are often not all from one standard, and having to stop for a single size is the whole argument for a set. Finish is about maintenance, not looks. Chromium plating sheds oil and resists corrosion, but no finish survives being put away wet. Wipe tools before they go back in. Wheels beat a handle. A set of this size is heavy, and a case that has to be carried is a case that stays where it is. Take the trays out when you start a big job. Working out of the tray on the floor beside you is faster than reaching into a case, and it makes the tidy-up an inventory check." }, { "id": "electricians-screwdriver-set", "sku": "Insulated-Tool-Set", "title": "Electricians Screwdriver Set", "slug": "electricians-screwdriver-set", "price": 1819, "currency": "GBP", "availability": "in_stock", "category": "hand-tools", "category_label": "Hand Tools", "tags": [ "insulated tools", "electricians", "1000v", "tool kit" ], "colors": [], "materials": [ "Insulated hand tools in a rolling case" ], "dimensions": "80 pieces", "weight": "Heavy", "images": [ "https://industrytoolsonline.co.uk/dropship-images/hand-tools/electricians-screwdriver-set/main-electricians-screwdriver-set.jpeg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/electricians-screwdriver-set/electricians-screwdriver-set-2.jpeg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/electricians-screwdriver-set/electricians-screwdriver-set-3.jpeg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/electricians-screwdriver-set/electricians-screwdriver-set-4.jpeg" ], "description_short": "1000 V insulated screwdrivers, nut drivers, pliers, cutters, sockets, a cable knife, a voltage detector and a 2 metre rule.", "description": "An insulated tool is protective equipment, and like all protective equipment it is the last line rather than the first.\n\nIsolate first. The safe method is to isolate the circuit, lock it off, and prove it dead. Insulated tools exist for the residual risk after all that, not instead of it.\n\nProve dead properly. An approved voltage indicator, proved on a known source before and after the test. A single pole detector, including the one in this set, tells you something is live; it does not reliably tell you something is dead.\n\nInspect before every use. Run the tool through your fingers and look at the insulation along its whole length. Nicks, splits, burns, crushing and any exposure of metal all take that tool out of service. Insulation does not get repaired with tape.\n\nDo not modify a tool. Grinding a driver tip, shortening a shaft or drilling a handle destroys the insulation system even where the coating still looks intact.\n\nKeep them apart from the rest. Insulated tools thrown in a bag with a hacksaw get damaged, and the damage is exactly the kind that is hard to see. The case has fitted positions for a reason.\n\nWatch the temperature. Insulation is a polymer: it goes hard and brittle when cold, and it softens with heat. Both change how it behaves under a knock.\n\nRetire on age as well as on damage. A set in daily use collects wear you stop noticing. If you cannot remember when a tool came into service, that is a reason to look at it harder rather than a reason to trust it.", "llm_summary": "Electricians Screwdriver Set sold by Industry Tools Company UK at industrytoolsonline.co.uk. An 80 piece 1000 V insulated electricians tool set in a rolling case. Screwdrivers, nut drivers, pliers, cutters, sockets, cable knife, rule and voltage detector. Price GBP 1819, reference price GBP 2299. Pieces: 80. Insulation: 1000 V rated across the set. Sockets: Inch 1/2 to 7/8 inch, metric 13 to 22 mm. Slotted drivers: 2.5 to 10.0 mm. Torx drivers: T6 to T30. Case: Rolling tool case. Insulated tools are rated equipment and not permission to work live. Isolate, prove dead with an approved voltage indicator and a proving unit, and inspect the insulation on every tool before every use. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/electricians-screwdriver-set", "canonical_url": "https://industrytoolsonline.co.uk/electricians-screwdriver-set", "json_url": "https://industrytoolsonline.co.uk/api/products/electricians-screwdriver-set.json", "updated_at": "2026-09-03", "compare_at_price": 2299, "description_text": "An insulated tool is protective equipment, and like all protective equipment it is the last line rather than the first. Isolate first. The safe method is to isolate the circuit, lock it off, and prove it dead. Insulated tools exist for the residual risk after all that, not instead of it. Prove dead properly. An approved voltage indicator, proved on a known source before and after the test. A single pole detector, including the one in this set, tells you something is live; it does not reliably tell you something is dead. Inspect before every use. Run the tool through your fingers and look at the insulation along its whole length. Nicks, splits, burns, crushing and any exposure of metal all take that tool out of service. Insulation does not get repaired with tape. Do not modify a tool. Grinding a driver tip, shortening a shaft or drilling a handle destroys the insulation system even where the coating still looks intact. Keep them apart from the rest. Insulated tools thrown in a bag with a hacksaw get damaged, and the damage is exactly the kind that is hard to see. The case has fitted positions for a reason. Watch the temperature. Insulation is a polymer: it goes hard and brittle when cold, and it softens with heat. Both change how it behaves under a knock. Retire on age as well as on damage. A set in daily use collects wear you stop noticing. If you cannot remember when a tool came into service, that is a reason to look at it harder rather than a reason to trust it." }, { "id": "jumbo-wrench-set", "sku": "Jumbo-Combination-Wrench-Set", "title": "Jumbo Wrench Set", "slug": "jumbo-wrench-set", "price": 89, "currency": "GBP", "availability": "in_stock", "category": "hand-tools", "category_label": "Hand Tools", "tags": [ "wrench set", "spanners", "hand tools", "black oxide" ], "colors": [], "materials": [ "Alloy steel with a black oxide finish" ], "dimensions": "1/4 inch to 1-1/4 inch, 6 mm to 32 mm", "weight": "Medium", "images": [ "https://industrytoolsonline.co.uk/dropship-images/hand-tools/jumbo-wrench-set/main-jumbo-wrench-set.jpeg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/jumbo-wrench-set/jumbo-wrench-set-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/jumbo-wrench-set/jumbo-wrench-set-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/jumbo-wrench-set/jumbo-wrench-set-4.jpg" ], "description_short": "Drop-forged alloy steel, raised panel shafts, 12 point chamfered box ends and engraved sizes, in a roll-up case with a hand strap.", "description": "Most rounded nuts are made by the person trying to undo them, and usually in the first ten seconds.\n\nStart with the right size. A wrench that is a size over, or an imperial wrench on a metric nut, feels like it fits and rounds the corners on the first real pull. If it rocks at all, it is wrong.\n\nUse the box end where you can. It surrounds the fastener and loads all the corners; an open end loads two flats and spreads them.\n\nPull, do not push. A pull that slips takes your knuckles away from the work. Where you must push, use an open palm rather than wrapped fingers.\n\nGive it penetrating oil and time. Ten minutes of soaking beats ten more pounds of force on anything rusted, and heat beats both where heat is safe to use.\n\nDo not extend the handle. A cheater bar turns a wrench into a lever that the fastener was never rated for, and what gives is usually the head of the bolt or the wrench itself.\n\nIf it starts to round, stop. Move up to a 6 point socket, a nut splitter or a grip wrench. Carrying on with the same tool only makes the next tool's job harder.\n\nPut them back in the roll. A set of sixteen becomes a set of eleven very quickly otherwise.", "llm_summary": "Jumbo Wrench Set sold by Industry Tools Company UK at industrytoolsonline.co.uk. A 16 piece combination wrench set in drop forged alloy steel. 1/4 inch to 1-1/4 inch, 15 degree offset open ends, 12 point box ends, black oxide. Price GBP 89, reference price GBP 119. Pieces: 16. Sizes: SAE 1/4 inch to 1-1/4 inch, 6 mm to 32 mm. Material: Alloy steel, drop forged. Finish: Black oxide. Open end: 15 degree angled offset. Box end: 12 point, chamfered. Case: Roll-up case with labelled slots and a hand strap. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/jumbo-wrench-set", "canonical_url": "https://industrytoolsonline.co.uk/jumbo-wrench-set", "json_url": "https://industrytoolsonline.co.uk/api/products/jumbo-wrench-set.json", "updated_at": "2026-09-03", "compare_at_price": 119, "description_text": "Most rounded nuts are made by the person trying to undo them, and usually in the first ten seconds. Start with the right size. A wrench that is a size over, or an imperial wrench on a metric nut, feels like it fits and rounds the corners on the first real pull. If it rocks at all, it is wrong. Use the box end where you can. It surrounds the fastener and loads all the corners; an open end loads two flats and spreads them. Pull, do not push. A pull that slips takes your knuckles away from the work. Where you must push, use an open palm rather than wrapped fingers. Give it penetrating oil and time. Ten minutes of soaking beats ten more pounds of force on anything rusted, and heat beats both where heat is safe to use. Do not extend the handle. A cheater bar turns a wrench into a lever that the fastener was never rated for, and what gives is usually the head of the bolt or the wrench itself. If it starts to round, stop. Move up to a 6 point socket, a nut splitter or a grip wrench. Carrying on with the same tool only makes the next tool's job harder. Put them back in the roll. A set of sixteen becomes a set of eleven very quickly otherwise." }, { "id": "magnetic-pickup-tool", "sku": "Magnetic-Pickup-Tool", "title": "Magnetic Pickup Tool", "slug": "magnetic-pickup-tool", "price": 39, "currency": "GBP", "availability": "in_stock", "category": "hand-tools", "category_label": "Hand Tools", "tags": [ "pickup tool", "magnet", "torch", "hand tools" ], "colors": [], "materials": [ "Aluminium alloy with an iron head" ], "dimensions": "19.6 cm x 5.4 cm x 2.9 cm packed", "weight": "Light", "images": [ "https://industrytoolsonline.co.uk/dropship-images/hand-tools/magnetic-pickup-tool/main-magnetic-pickup-tool.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/magnetic-pickup-tool/magnetic-pickup-tool-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/magnetic-pickup-tool/magnetic-pickup-tool-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/magnetic-pickup-tool/magnetic-pickup-tool-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/magnetic-pickup-tool/magnetic-pickup-tool-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/magnetic-pickup-tool/magnetic-pickup-tool-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/magnetic-pickup-tool/magnetic-pickup-tool-7.jpg" ], "description_short": "Aluminium alloy body, an integrated magnet the maker rates to 1 kg, a 360 degree bending neck and a hook, running on alkaline cells.", "description": "The first rule of a dropped fastener is to stop moving. Every extra shuffle sends it further into somewhere worse.\n\nWork out what it is before you fish for it. Steel comes out on a magnet. Stainless is usually only weakly magnetic, and aluminium, brass and plastic are not magnetic at all, which is what the hook is for.\n\nLight it first, then reach. The reason a light on the tool beats a torch in the other hand is that you can see the part and the tool at the same time, and can watch the magnet arrive rather than sweeping blind.\n\nBend the neck to the shape of the gap rather than forcing the tool straight in. A 360 degree neck can be set to a dog-leg, and that is what gets round a bracket.\n\nDo not sweep a strong magnet across electronics or a card. It is a small magnet, but the habit is worth having.\n\nKeep the magnet face clean. Swarf sticks to it and every layer of swarf costs you some of the rated 1 kg.\n\nIf it is under a car, do not go under the car for it. Get the vehicle properly supported first: no dropped bolt is worth a lift that is not on stands.", "llm_summary": "Magnetic Pickup Tool sold by Industry Tools Company UK at industrytoolsonline.co.uk. A telescoping magnetic pickup tool with a bending neck and a built in light. Aluminium alloy body, magnet rated to 1 kg, three LEDs, 360 degree neck, hook included. Price GBP 39, reference price GBP 59. Material: Iron head, aluminium alloy body. Magnet: Integrated, rated to lift up to 1 kg. Light: Three LEDs, 360 degree illumination. Neck: Bends through 360 degrees. Batteries: Alkaline, included. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/magnetic-pickup-tool", "canonical_url": "https://industrytoolsonline.co.uk/magnetic-pickup-tool", "json_url": "https://industrytoolsonline.co.uk/api/products/magnetic-pickup-tool.json", "updated_at": "2026-09-03", "compare_at_price": 59, "description_text": "The first rule of a dropped fastener is to stop moving. Every extra shuffle sends it further into somewhere worse. Work out what it is before you fish for it. Steel comes out on a magnet. Stainless is usually only weakly magnetic, and aluminium, brass and plastic are not magnetic at all, which is what the hook is for. Light it first, then reach. The reason a light on the tool beats a torch in the other hand is that you can see the part and the tool at the same time, and can watch the magnet arrive rather than sweeping blind. Bend the neck to the shape of the gap rather than forcing the tool straight in. A 360 degree neck can be set to a dog-leg, and that is what gets round a bracket. Do not sweep a strong magnet across electronics or a card. It is a small magnet, but the habit is worth having. Keep the magnet face clean. Swarf sticks to it and every layer of swarf costs you some of the rated 1 kg. If it is under a car, do not go under the car for it. Get the vehicle properly supported first: no dropped bolt is worth a lift that is not on stands." }, { "id": "pick-and-hook-set", "sku": "Heavy-Duty-Pick-&-Hook-Set", "title": "Heavy Duty Pick and Hook Set", "slug": "pick-and-hook-set", "price": 33, "currency": "GBP", "availability": "in_stock", "category": "hand-tools", "category_label": "Hand Tools", "tags": [ "picks", "hooks", "o rings", "automotive" ], "colors": [], "materials": [ "Steel picks with a soft rubber handle layer" ], "dimensions": "10 head shapes", "weight": "Light", "images": [ "https://industrytoolsonline.co.uk/dropship-images/hand-tools/pick-and-hook-set/main-pick-and-hook-set.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/pick-and-hook-set/pick-and-hook-set-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/pick-and-hook-set/pick-and-hook-set-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/pick-and-hook-set/pick-and-hook-set-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/pick-and-hook-set/pick-and-hook-set-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/pick-and-hook-set/pick-and-hook-set-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/hand-tools/pick-and-hook-set/pick-and-hook-set-7.jpg" ], "description_short": "A 90 degree hook, a large full hook, a straight pick, a small full hook, a combination pick, an offset pick, a hose pick and a cotter pick, rated to a drawing force over 90 kg.", "description": "The seal is cheap. The face it sits against is not, and that is the whole of this job.\n\nChoose the shape before the force. A straight pick works when you can get behind the ring. When you cannot, an offset or a 90 degree hook will get under it from the side, and swapping shape is almost always faster than pushing harder.\n\nLift the ring, do not lever off the groove. Put the point into the rubber, roll the ring up out of its seat, then pull it clear. The moment the tip is bearing on metal you are scoring a sealing face.\n\nWork cold where you can. Old rubber is brittle and comes out in pieces; warm rubber stretches and comes out whole.\n\nCount the pieces. A fragment left in a groove is what makes a new seal leak, and it is very easy to miss.\n\nClean the groove before the new ring goes in, and check it with your fingernail. Anything you can feel, the seal will find.\n\nKeep the tips true. A pick that has been used as a screwdriver has a rolled tip, and a rolled tip tears rubber instead of lifting it.", "llm_summary": "Heavy Duty Pick and Hook Set sold by Industry Tools Company UK at industrytoolsonline.co.uk. A ten shape pick and hook set for O rings, seals, clips and cotter pins. Bent shafts, cushioned handles, drawing force over 90 kg as stated by the maker. Price GBP 33, reference price GBP 49. Head shapes: 10. Included tools: 90 degree hook, large full hook, straight pick, small full hook, combination pick, offset pick, hose pick, cotter pick. Drawing force: More than 90 kg, stated by the maker. Shaft: Bent design for working in a small space. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/pick-and-hook-set", "canonical_url": "https://industrytoolsonline.co.uk/pick-and-hook-set", "json_url": "https://industrytoolsonline.co.uk/api/products/pick-and-hook-set.json", "updated_at": "2026-09-03", "compare_at_price": 49, "description_text": "The seal is cheap. The face it sits against is not, and that is the whole of this job. Choose the shape before the force. A straight pick works when you can get behind the ring. When you cannot, an offset or a 90 degree hook will get under it from the side, and swapping shape is almost always faster than pushing harder. Lift the ring, do not lever off the groove. Put the point into the rubber, roll the ring up out of its seat, then pull it clear. The moment the tip is bearing on metal you are scoring a sealing face. Work cold where you can. Old rubber is brittle and comes out in pieces; warm rubber stretches and comes out whole. Count the pieces. A fragment left in a groove is what makes a new seal leak, and it is very easy to miss. Clean the groove before the new ring goes in, and check it with your fingernail. Anything you can feel, the seal will find. Keep the tips true. A pick that has been used as a screwdriver has a rolled tip, and a rolled tip tears rubber instead of lifting it." }, { "id": "furniture-mover", "sku": "Furniture-Mover", "title": "Furniture Mover", "slug": "furniture-mover", "price": 69, "currency": "GBP", "availability": "in_stock", "category": "material-handling-equipment", "category_label": "Material Handling Equipment", "tags": [ "furniture mover", "dolly", "material handling", "castors" ], "colors": [], "materials": [ "ABS, steel and TPE" ], "dimensions": "3.2 cm castors", "weight": "Light", "images": [ "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-mover/main-furniture-mover.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-mover/furniture-mover-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-mover/furniture-mover-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-mover/furniture-mover-4.jpg" ], "description_short": "ABS, steel and TPE, with 3.2 cm TPE castors that rotate a full 360 degrees and are chosen not to mark a floor, plus a 90 degree lifter.", "description": "Dollies turn a lift into a push, and a push is where floors get damaged. Almost all of that damage is avoidable.\n\nClean the route first. A single grain of grit under a wheel is a scratch the length of the hall. Sweep, then check the wheels themselves before the first move.\n\nLift the corner rather than levering the piece. The lifter is designed to take one corner just high enough for a dolly to go under, and using the furniture itself as a lever is what breaks a leg or a plinth.\n\nPut the dollies under the load-bearing points, not the middle of a panel. On a wardrobe that is the corners; on a sofa it is the frame under the arms. A dolly under a thin base panel will push through it.\n\nTurn with the castors rather than shoving. Omnidirectional wheels mean you can rotate the piece in place, which is how a long item gets through a doorway without scuffing both frames.\n\nWatch thresholds. A dolly stops dead at a door bar and the load keeps going. Slow down before every change of surface.\n\nOn carpet, dollies are the wrong tool. The wheels sink and the effort goes up; flat sliders work better on soft floors.\n\nTake the dollies out the same way they went in, one corner at a time. Tipping a piece off them is how the last minute of a move becomes the expensive one.", "llm_summary": "Furniture Mover sold by Industry Tools Company UK at industrytoolsonline.co.uk. A furniture dolly and lifter set for moving heavy furniture without carrying it. ABS, steel and TPE with 3.2 cm 360 degree castors and a 90 degree lifter. Price GBP 69, reference price GBP 99. Material: ABS, steel and TPE. Castors: 3.2 cm, TPE, 360 degree rotation. Lifter: 90 degree design with an ergonomic handle. Profile: Low, fits under furniture of different heights. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/furniture-mover", "canonical_url": "https://industrytoolsonline.co.uk/furniture-mover", "json_url": "https://industrytoolsonline.co.uk/api/products/furniture-mover.json", "updated_at": "2026-09-03", "compare_at_price": 99, "description_text": "Dollies turn a lift into a push, and a push is where floors get damaged. Almost all of that damage is avoidable. Clean the route first. A single grain of grit under a wheel is a scratch the length of the hall. Sweep, then check the wheels themselves before the first move. Lift the corner rather than levering the piece. The lifter is designed to take one corner just high enough for a dolly to go under, and using the furniture itself as a lever is what breaks a leg or a plinth. Put the dollies under the load-bearing points, not the middle of a panel. On a wardrobe that is the corners; on a sofa it is the frame under the arms. A dolly under a thin base panel will push through it. Turn with the castors rather than shoving. Omnidirectional wheels mean you can rotate the piece in place, which is how a long item gets through a doorway without scuffing both frames. Watch thresholds. A dolly stops dead at a door bar and the load keeps going. Slow down before every change of surface. On carpet, dollies are the wrong tool. The wheels sink and the effort goes up; flat sliders work better on soft floors. Take the dollies out the same way they went in, one corner at a time. Tipping a piece off them is how the last minute of a move becomes the expensive one." }, { "id": "furniture-moving-straps", "sku": "shoulder-dolly-moving-straps", "title": "Furniture Moving Straps", "slug": "furniture-moving-straps", "price": 59, "currency": "GBP", "availability": "in_stock", "category": "material-handling-equipment", "category_label": "Material Handling Equipment", "tags": [ "moving straps", "lifting", "material handling", "two person" ], "colors": [], "materials": [ "Webbing with a buckle adjuster" ], "dimensions": "Adjustable webbing, one size", "weight": "Light", "images": [ "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-moving-straps/main-furniture-moving-straps.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-moving-straps/furniture-moving-straps-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-moving-straps/furniture-moving-straps-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-moving-straps/furniture-moving-straps-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-moving-straps/furniture-moving-straps-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-moving-straps/furniture-moving-straps-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-moving-straps/furniture-moving-straps-7.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/furniture-moving-straps/furniture-moving-straps-8.jpg" ], "description_short": "A shoulder-carried lifting system for furniture, appliances and mattresses, rated by its maker to 363 kg and adjustable to fit any two people.", "description": "Moving straps solve one problem well: getting a heavy, awkward item through a house without putting the load on your hands and lower back.\n\nThe webbing goes under the item and over both shoulders. Lifting straightens your legs rather than your back, and the item comes up with you. Because nothing is being gripped, your hands are free to steady a corner, open a door, or take a banister on the way down.\n\nThat last part is why straps beat a trolley indoors. A trolley is better on a flat, clear run. A staircase, a tight landing or a doorway with a turn in it is where two people on straps get an item through and a trolley does not.\n\nSet the length before you lift, not after. Each person adjusts their own webbing through the buckle so the item sits level, and a level item is one that does not slide when the first person steps up.\n\nThe rated capacity, 363 kg, is the equipment's limit. It is not a plan. What matters on a staircase is what two people can control, and that is a much smaller number. If either of you cannot hold the item still on the flat, do not take it up steps.\n\nCheck the webbing every time. Cuts, fraying and heat damage all weaken it, and none of them repair. A damaged strap is retired rather than mended.\n\nTwo things straps are not for: a load one person is trying to move alone, and a lift where the item cannot be got hold of underneath. Both of those want different equipment.", "llm_summary": "Furniture Moving Straps sold by Industry Tools Company UK at industrytoolsonline.co.uk. A two-person shoulder lifting system for furniture, appliances and mattresses. Two adjustable straps, rated by the maker to 363 kg, one size fits all. Price GBP 59, reference price GBP 79. In the set: 2 adjustable lifting straps. Rated capacity: 363 kg (800 lb), stated by the maker. Adjustment: Webbing through a buckle. Carry method: Over the shoulders, hands free. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/furniture-moving-straps", "canonical_url": "https://industrytoolsonline.co.uk/furniture-moving-straps", "json_url": "https://industrytoolsonline.co.uk/api/products/furniture-moving-straps.json", "updated_at": "2026-09-03", "compare_at_price": 79, "description_text": "Moving straps solve one problem well: getting a heavy, awkward item through a house without putting the load on your hands and lower back. The webbing goes under the item and over both shoulders. Lifting straightens your legs rather than your back, and the item comes up with you. Because nothing is being gripped, your hands are free to steady a corner, open a door, or take a banister on the way down. That last part is why straps beat a trolley indoors. A trolley is better on a flat, clear run. A staircase, a tight landing or a doorway with a turn in it is where two people on straps get an item through and a trolley does not. Set the length before you lift, not after. Each person adjusts their own webbing through the buckle so the item sits level, and a level item is one that does not slide when the first person steps up. The rated capacity, 363 kg, is the equipment's limit. It is not a plan. What matters on a staircase is what two people can control, and that is a much smaller number. If either of you cannot hold the item still on the flat, do not take it up steps. Check the webbing every time. Cuts, fraying and heat damage all weaken it, and none of them repair. A damaged strap is retired rather than mended. Two things straps are not for: a load one person is trying to move alone, and a lift where the item cannot be got hold of underneath. Both of those want different equipment." }, { "id": "manual-lever-hoist", "sku": "Manual-Lever-Hoist", "title": "Manual Lever Hoist", "slug": "manual-lever-hoist", "price": 109, "currency": "GBP", "availability": "in_stock", "category": "material-handling-equipment", "category_label": "Material Handling Equipment", "tags": [ "lever hoist", "lifting", "material handling", "come along" ], "colors": [], "materials": [ "20MN2 alloy steel chain, cold rolled steel body" ], "dimensions": "3 m of chain, 6 mm load chain diameter", "weight": "Heavy", "images": [ "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/manual-lever-hoist/main-manual-lever-hoist.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/manual-lever-hoist/manual-lever-hoist-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/manual-lever-hoist/manual-lever-hoist-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/manual-lever-hoist/manual-lever-hoist-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/manual-lever-hoist/manual-lever-hoist-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/manual-lever-hoist/manual-lever-hoist-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/manual-lever-hoist/manual-lever-hoist-7.jpg" ], "description_short": "6 mm load chain in 20MN2 alloy steel with a black oxide finish, a dual pawl brake, drop-forged latched swivel hooks and a carry bag.", "description": "A lever hoist is one of the few tools that will happily lift more than you should ask it to. Everything below is about not finding out where that line is.\n\nStart with the load. You need a real figure, not an estimate, and you need to know where its centre of gravity sits. A load that swings when it lifts was rigged off centre.\n\nThen the anchor. The hoist is rated to 0.75 tonne and that number means nothing if the beam, eye or sling above it is rated for less. The lowest rating in the chain is what you have.\n\nCheck the load chain end to end before every lift. You are looking for stretch, nicks, gouges, corrosion and twists. Run it through your gloved hand. A chain that has been overloaded stretches, and a stretched link is a link on its way out.\n\nCheck the hooks. Both should swivel freely, both latches should close under their own spring, and neither should be opened out. A hook that has spread has been overloaded and does not go back.\n\nRig so the chain hangs in line with the load. A lever hoist pulled sideways loads the chain across the links rather than along them, which is the direction it is not rated for.\n\nNever extend the lever. A cheater bar puts more force into the mechanism than it is built for, and the brake is the part that gives. If the load will not move on the standard lever, the load is too heavy.\n\nAt work in Great Britain this is lifting equipment under LOLER 1998, so it needs thorough examination by a competent person at the required intervals, and records kept. That is a legal duty rather than a suggestion.\n\nStore it dry and hung rather than in a heap on a floor. Chain rusts where it sits in water, and the bag it comes with is there for a reason.", "llm_summary": "Manual Lever Hoist sold by Industry Tools Company UK at industrytoolsonline.co.uk. A hand powered lever hoist for lifting and pulling, rated to 0.75 tonne. 6 mm G80 alloy load chain, 3 metres, dual pawl brake, latched swivel hooks. Price GBP 109, reference price GBP 139. Rated capacity: 0.75 tonne, 1650 lb, 750 kg. Load chain: 6 mm diameter, G80 alloy steel, zinc plated. Chain length: 3 metres. Brake: Dual pawl brake system. Hooks: Drop-forged, safety latch, 360 degree swivel. Included: Storage bag and shoulder strap. This is lifting equipment. In Great Britain its use at work is covered by LOLER 1998, which requires thorough examination by a competent person; check the chain, hooks and latches before every lift. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/manual-lever-hoist", "canonical_url": "https://industrytoolsonline.co.uk/manual-lever-hoist", "json_url": "https://industrytoolsonline.co.uk/api/products/manual-lever-hoist.json", "updated_at": "2026-09-03", "compare_at_price": 139, "description_text": "A lever hoist is one of the few tools that will happily lift more than you should ask it to. Everything below is about not finding out where that line is. Start with the load. You need a real figure, not an estimate, and you need to know where its centre of gravity sits. A load that swings when it lifts was rigged off centre. Then the anchor. The hoist is rated to 0.75 tonne and that number means nothing if the beam, eye or sling above it is rated for less. The lowest rating in the chain is what you have. Check the load chain end to end before every lift. You are looking for stretch, nicks, gouges, corrosion and twists. Run it through your gloved hand. A chain that has been overloaded stretches, and a stretched link is a link on its way out. Check the hooks. Both should swivel freely, both latches should close under their own spring, and neither should be opened out. A hook that has spread has been overloaded and does not go back. Rig so the chain hangs in line with the load. A lever hoist pulled sideways loads the chain across the links rather than along them, which is the direction it is not rated for. Never extend the lever. A cheater bar puts more force into the mechanism than it is built for, and the brake is the part that gives. If the load will not move on the standard lever, the load is too heavy. At work in Great Britain this is lifting equipment under LOLER 1998, so it needs thorough examination by a competent person at the required intervals, and records kept. That is a legal duty rather than a suggestion. Store it dry and hung rather than in a heap on a floor. Chain rusts where it sits in water, and the bag it comes with is there for a reason." }, { "id": "pallet-buster", "sku": "Pallet-Buster", "title": "Pallet Buster", "slug": "pallet-buster", "price": 69, "currency": "GBP", "availability": "in_stock", "category": "material-handling-equipment", "category_label": "Material Handling Equipment", "tags": [ "pallet buster", "demolition", "reclaimed timber", "hand tool" ], "colors": [], "materials": [ "Steel" ], "dimensions": "133 cm handle, 10.16 cm forking gap", "weight": "7 lb 4 oz", "images": [ "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/pallet-buster/main-pallet-buster.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/pallet-buster/pallet-buster-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/pallet-buster/pallet-buster-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/material-handling-equipment/pallet-buster/pallet-buster-4.jpg" ], "description_short": "Steel, four pieces, a 10.16 cm rubber grip and a 10.16 cm forking gap that spreads the lift across the board instead of one nail.", "description": "The reason reclaimed pallet timber usually looks bad is not the timber. It is how it came off.\n\nA crowbar loads one nail at a time. The board flexes, the fibres let go around the nail head, and you get a split end and a hole. Do that on both ends of every board and you are left with short pieces.\n\nA forked breaker loads the whole width at once. Both nails at that end lift together, the board stays flat, and it comes off with its ends intact.\n\nWork one end at a time and work along the stringer. Set the fork so both nails are inside the gap, take the handle down in one steady movement rather than jerking it, and let the leverage do it. If a board will not give, move the fork rather than adding force.\n\nPull the nails as you go. A pile of boards with nails still in them is a hazard and it is also harder to stack. A nail puller or a claw hammer finishes what the breaker starts.\n\nOld pallets can be treated. Look for the IPPC stamp: HT is heat treated, and MB is methyl bromide, which is not something to bring indoors or burn.\n\nWear gloves and eye protection. Nails come out at speed sometimes, and pallet timber is rarely splinter free.", "llm_summary": "Pallet Buster sold by Industry Tools Company UK at industrytoolsonline.co.uk. A long handled steel breaker for taking pallets apart board by board. 133 cm handle, 10.16 cm rubber grip, 10.16 cm forking gap, collapsible. Price GBP 69, reference price GBP 99. Handle: 133 cm long. Grip: 10.16 cm rubber. Forking gap: 10.16 cm. Material: Steel. Weight: 7 lb 4 oz. Colour: Yellow. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/pallet-buster", "canonical_url": "https://industrytoolsonline.co.uk/pallet-buster", "json_url": "https://industrytoolsonline.co.uk/api/products/pallet-buster.json", "updated_at": "2026-09-03", "compare_at_price": 99, "description_text": "The reason reclaimed pallet timber usually looks bad is not the timber. It is how it came off. A crowbar loads one nail at a time. The board flexes, the fibres let go around the nail head, and you get a split end and a hole. Do that on both ends of every board and you are left with short pieces. A forked breaker loads the whole width at once. Both nails at that end lift together, the board stays flat, and it comes off with its ends intact. Work one end at a time and work along the stringer. Set the fork so both nails are inside the gap, take the handle down in one steady movement rather than jerking it, and let the leverage do it. If a board will not give, move the fork rather than adding force. Pull the nails as you go. A pile of boards with nails still in them is a hazard and it is also harder to stack. A nail puller or a claw hammer finishes what the breaker starts. Old pallets can be treated. Look for the IPPC stamp: HT is heat treated, and MB is methyl bromide, which is not something to bring indoors or burn. Wear gloves and eye protection. Nails come out at speed sometimes, and pallet timber is rarely splinter free." }, { "id": "caliper-measuring-tool", "sku": "Caliper-Measuring-Tool", "title": "Caliper Measuring Tool", "slug": "caliper-measuring-tool", "price": 75, "currency": "GBP", "availability": "in_stock", "category": "measuring-and-inspection-tools", "category_label": "Measuring & Inspection Tools", "tags": [ "caliper", "measuring", "inspection", "digital" ], "colors": [], "materials": [ "Hardened stainless steel with a zinc alloy housing" ], "dimensions": "Measuring range 0 to 150 mm / 0 to 6 inch", "weight": "Light", "images": [ "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/caliper-measuring-tool/main-caliper-measuring-tool.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/caliper-measuring-tool/caliper-measuring-tool-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/caliper-measuring-tool/caliper-measuring-tool-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/caliper-measuring-tool/caliper-measuring-tool-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/caliper-measuring-tool/caliper-measuring-tool-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/caliper-measuring-tool/caliper-measuring-tool-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/caliper-measuring-tool/caliper-measuring-tool-7.jpg" ], "description_short": "0 to 150 mm, 0.01 mm resolution, ±0.02 mm accuracy, IP54, in hardened stainless steel with a spare battery and a hard case.", "description": "A caliper is only as good as the reading you can repeat. Two people measuring the same shaft should get the same number, and if they do not, the tool is usually not the reason.\n\nClean first. A chip of swarf on a jaw face is worth more than the tool's whole error budget, and it is the most common cause of a measurement that will not settle.\n\nZero before every job, with the jaws closed and dry. Then take the measurement with light, even pressure. A caliper is a lever, and leaning on it will read small on an outside measurement and large on an inside one.\n\nLet the part and the tool sit at the same temperature. Steel moves with heat, and a part straight off a machine is not the size it will be in twenty minutes. This is the reason the glass sensor matters: it takes one of the two variables out of the problem.\n\nUse the right face. Outside jaws for outside dimensions, the inside knives for a bore, the depth rod for a step. The blade edges are for scribing on some calipers and not on this one, so treat the jaws as measuring faces only.\n\nFor a differential measurement, zero on the reference rather than doing arithmetic afterwards. It is faster and it removes the mistake.\n\nStore it closed, in the case, with the battery out if it is going into a drawer for the winter. A leaking cell is the usual end of a caliper that was otherwise fine.", "llm_summary": "Caliper Measuring Tool sold by Industry Tools Company UK at industrytoolsonline.co.uk. A digital caliper with a glass sensor for stable readings. 0 to 150 mm, 0.01 mm resolution, plus or minus 0.02 mm accuracy, IP54. Price GBP 75, reference price GBP 99. Material: Stainless steel, zinc alloy housing. Measuring range: 0 to 150 mm / 0 to 6 inch. Resolution: 0.01 mm. Accuracy: plus or minus 0.02 mm. Ingress protection: IP54. Battery: 3V CR2032 lithium. In the box: Caliper, hard case, spare battery, manual. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/caliper-measuring-tool", "canonical_url": "https://industrytoolsonline.co.uk/caliper-measuring-tool", "json_url": "https://industrytoolsonline.co.uk/api/products/caliper-measuring-tool.json", "updated_at": "2026-09-03", "compare_at_price": 99, "description_text": "A caliper is only as good as the reading you can repeat. Two people measuring the same shaft should get the same number, and if they do not, the tool is usually not the reason. Clean first. A chip of swarf on a jaw face is worth more than the tool's whole error budget, and it is the most common cause of a measurement that will not settle. Zero before every job, with the jaws closed and dry. Then take the measurement with light, even pressure. A caliper is a lever, and leaning on it will read small on an outside measurement and large on an inside one. Let the part and the tool sit at the same temperature. Steel moves with heat, and a part straight off a machine is not the size it will be in twenty minutes. This is the reason the glass sensor matters: it takes one of the two variables out of the problem. Use the right face. Outside jaws for outside dimensions, the inside knives for a bore, the depth rod for a step. The blade edges are for scribing on some calipers and not on this one, so treat the jaws as measuring faces only. For a differential measurement, zero on the reference rather than doing arithmetic afterwards. It is faster and it removes the mistake. Store it closed, in the case, with the battery out if it is going into a drawer for the winter. A leaking cell is the usual end of a caliper that was otherwise fine." }, { "id": "laser-level", "sku": "laser-level", "title": "Laser Level", "slug": "laser-level", "price": 699, "currency": "GBP", "availability": "in_stock", "category": "measuring-and-inspection-tools", "category_label": "Measuring & Inspection Tools", "tags": [ "laser level", "measuring", "360 laser", "green beam" ], "colors": [], "materials": [ "Overmoulded housing, IP65 rated" ], "dimensions": "15.57 cm x 45.09 cm x 31.75 cm", "weight": "3.74 kg", "images": [ "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/laser-level/main-laser-level.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/laser-level/laser-level-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/laser-level/laser-level-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/laser-level/laser-level-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/laser-level/laser-level-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/laser-level/laser-level-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/measuring-and-inspection-tools/laser-level/laser-level-7.jpg" ], "description_short": "Class 2 laser at 1.50 mW or less, IP65 rated, with a locking pendulum, a 1/4 inch and 5/8 inch threaded magnetic bracket and 3.74 kg of tool.", "description": "A laser level is only as level as its set-up. The tool self-levels within its range; it does not fix a base that moves.\n\nSet it where it is not going to be knocked. A tripod leg in a walkway, or a magnetic bracket on a member somebody is about to hit, will move the reference without announcing it. Re-check the line against a known mark every so often, and always after a bump.\n\nGive the pendulum time. Self-levelling takes a few seconds, and reading the line before it has settled is a common mistake. Some tools flash to say they are outside their levelling range: that is a warning, not a fault.\n\nGreen over red matters outdoors and at distance. The eye is more sensitive to green, so the same power reads as brighter. In full sun even green loses, and that is what pulse mode and a detector are for.\n\nUse the detector properly. In full-time pulse the beam can be found well beyond visible range, and the detector rather than your eye is what should be setting marks at that distance.\n\nMind the mounting surface. A magnetic bracket on painted or rusty steel can creep. Clean the spot, and check the tool is actually held before letting go of it.\n\nLock the pendulum before it goes in the van. That single habit is the difference between a level that stays calibrated and one that quietly does not.\n\nVerify calibration now and then. Set the tool up, mark a point at each end of a long run, rotate the tool 180 degrees, and check the marks still agree. A tool that has been dropped will tell you here.", "llm_summary": "Laser Level sold by Industry Tools Company UK at industrytoolsonline.co.uk. A green 360 degree laser level on a 12V lithium ion battery platform. Class 2 at 1.50 mW or less, IP65, integrated magnetic bracket with 1/4 and 5/8 inch threads. Price GBP 699, reference price GBP 799. Beam colour: Green. Laser class: Class 2, output power 1.50 mW or less. Item weight: 3.74 kg. Battery: 12V MAX lithium ion power tool battery platform. Ingress protection: IP65. Not included: Tripod. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/laser-level", "canonical_url": "https://industrytoolsonline.co.uk/laser-level", "json_url": "https://industrytoolsonline.co.uk/api/products/laser-level.json", "updated_at": "2026-09-03", "compare_at_price": 799, "description_text": "A laser level is only as level as its set-up. The tool self-levels within its range; it does not fix a base that moves. Set it where it is not going to be knocked. A tripod leg in a walkway, or a magnetic bracket on a member somebody is about to hit, will move the reference without announcing it. Re-check the line against a known mark every so often, and always after a bump. Give the pendulum time. Self-levelling takes a few seconds, and reading the line before it has settled is a common mistake. Some tools flash to say they are outside their levelling range: that is a warning, not a fault. Green over red matters outdoors and at distance. The eye is more sensitive to green, so the same power reads as brighter. In full sun even green loses, and that is what pulse mode and a detector are for. Use the detector properly. In full-time pulse the beam can be found well beyond visible range, and the detector rather than your eye is what should be setting marks at that distance. Mind the mounting surface. A magnetic bracket on painted or rusty steel can creep. Clean the spot, and check the tool is actually held before letting go of it. Lock the pendulum before it goes in the van. That single habit is the difference between a level that stays calibrated and one that quietly does not. Verify calibration now and then. Set the tool up, mark a point at each end of a long run, rotate the tool 180 degrees, and check the marks still agree. A tool that has been dropped will tell you here." }, { "id": "magnetic-drill", "sku": "Magnetic-Drill", "title": "Magnetic Drill", "slug": "magnetic-drill", "price": 1579, "currency": "GBP", "availability": "in_stock", "category": "power-tools", "category_label": "Power Tools", "tags": [ "magnetic drill", "mag drill", "power tools", "steel fabrication" ], "colors": [], "materials": [ "Corded electric magnetic base drill" ], "dimensions": "29.5 cm x 19.7 cm x 45.7 cm", "weight": "15.8 kg", "images": [ "https://industrytoolsonline.co.uk/dropship-images/power-tools/magnetic-drill/main-magnetic-drill.jpeg", "https://industrytoolsonline.co.uk/dropship-images/power-tools/magnetic-drill/magnetic-drill-2.jpeg", "https://industrytoolsonline.co.uk/dropship-images/power-tools/magnetic-drill/magnetic-drill-3.jpeg", "https://industrytoolsonline.co.uk/dropship-images/power-tools/magnetic-drill/magnetic-drill-4.jpeg", "https://industrytoolsonline.co.uk/dropship-images/power-tools/magnetic-drill/magnetic-drill-5.jpeg", "https://industrytoolsonline.co.uk/dropship-images/power-tools/magnetic-drill/magnetic-drill-6.jpeg", "https://industrytoolsonline.co.uk/dropship-images/power-tools/magnetic-drill/magnetic-drill-7.jpeg" ], "description_short": "Corded, 450 rpm, 15.8 kg, drilling to 3.81 cm diameter and 5 cm deep, with a slot drive arbor, an LED pilot light and a carrying case.", "description": "A mag drill is a drill press that trusts a magnet. Everything that goes wrong with one starts there.\n\nClean the face. Magnetic hold is made through contact, and a layer of swarf, scale, paint or rust between the magnet and the steel costs a large share of it. Wire brush the spot, not just the general area.\n\nCheck the thickness. Every mag drill has a minimum material thickness below which the magnet cannot develop full hold. Thin plate needs a backing plate underneath to make up the section.\n\nUse the chain. Every time, not just overhead. A safety chain around the beam and through the machine is what turns a magnet failure into a jolt instead of a dropped machine.\n\nSet the cutter and the pilot before energising. Line up the pilot pin on the centre punch, then switch the magnet on, then check that nothing has moved.\n\nFeed steadily. Annular cutters cut a ring, and they want continuous pressure rather than pecking. Backing off part way through glazes the cutting edges, and a glazed cutter rubs and heats.\n\nUse cutting fluid. The reservoir is there for a reason and the cutter life difference is not small.\n\nWatch the slug. When the ring is through it comes out as a slug and it will be hot and sharp. Overhead, it drops, so nobody stands underneath.\n\nClear swarf from the slide as you go. Swarf in the dovetail is what makes a machine bind and then chatter, and chatter is what breaks cutters.", "llm_summary": "Magnetic Drill sold by Industry Tools Company UK at industrytoolsonline.co.uk. A portable magnetic base drill for steel fabrication. Corded, 450 rpm, 15.8 kg, up to 3.81 cm diameter and 5 cm deep, with a lift detector. Price GBP 1579, reference price GBP 1899. Item dimensions: 29.5 cm x 19.7 cm x 45.7 cm. Item weight: 15.8 kg. Power source: Corded electric. Speed: 450 rpm. Maximum hole diameter: 3.81 cm. Maximum depth: 5 cm. Safety: Lift detector system, two safety chains supplied. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/magnetic-drill", "canonical_url": "https://industrytoolsonline.co.uk/magnetic-drill", "json_url": "https://industrytoolsonline.co.uk/api/products/magnetic-drill.json", "updated_at": "2026-09-03", "compare_at_price": 1899, "description_text": "A mag drill is a drill press that trusts a magnet. Everything that goes wrong with one starts there. Clean the face. Magnetic hold is made through contact, and a layer of swarf, scale, paint or rust between the magnet and the steel costs a large share of it. Wire brush the spot, not just the general area. Check the thickness. Every mag drill has a minimum material thickness below which the magnet cannot develop full hold. Thin plate needs a backing plate underneath to make up the section. Use the chain. Every time, not just overhead. A safety chain around the beam and through the machine is what turns a magnet failure into a jolt instead of a dropped machine. Set the cutter and the pilot before energising. Line up the pilot pin on the centre punch, then switch the magnet on, then check that nothing has moved. Feed steadily. Annular cutters cut a ring, and they want continuous pressure rather than pecking. Backing off part way through glazes the cutting edges, and a glazed cutter rubs and heats. Use cutting fluid. The reservoir is there for a reason and the cutter life difference is not small. Watch the slug. When the ring is through it comes out as a slug and it will be hot and sharp. Overhead, it drops, so nobody stands underneath. Clear swarf from the slide as you go. Swarf in the dovetail is what makes a machine bind and then chatter, and chatter is what breaks cutters." }, { "id": "hard-hat-face-shield", "sku": "Safety-Face-Shield", "title": "Hard Hat Face Shield", "slug": "hard-hat-face-shield", "price": 59, "currency": "GBP", "availability": "in_stock", "category": "safety-tools-and-equipment", "category_label": "Safety Tools & Equipment", "tags": [ "safety helmet", "face shield", "hearing protection", "PPE" ], "colors": [], "materials": [ "Moulded shell with mesh and plastic visors" ], "dimensions": "30.5 cm x 23 cm x 16.5 cm, head sizes 52 to 62 cm", "weight": "1.2 kg", "images": [ "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/hard-hat-face-shield/main-hard-hat-face-shield.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/hard-hat-face-shield/hard-hat-face-shield-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/hard-hat-face-shield/hard-hat-face-shield-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/hard-hat-face-shield/hard-hat-face-shield-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/hard-hat-face-shield/hard-hat-face-shield-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/hard-hat-face-shield/hard-hat-face-shield-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/hard-hat-face-shield/hard-hat-face-shield-7.jpg" ], "description_short": "An industrial safety helmet with removable earmuffs rated SNR 26 dB by the maker, a plastic visor and a mesh visor, at 1.2 kg.", "description": "The best protective equipment is the equipment that is actually on when the noise starts. That is a comfort and convenience question as much as a specification one.\n\nStart with the hazard rather than the product. Falling objects, flying chippings, splash and noise are four different problems, and a combination helmet is worth buying when you have several of them at once.\n\nRead the marking on the product itself. Certification is printed on the shell and on the muff cup, and it is the only thing that tells you what a piece of equipment has been tested to. A description in a listing, including this one, is not a certification.\n\nFit is what decides whether hearing protection works. A muff rated in a laboratory and worn over a hood, over glasses arms, or on a loose headband delivers a fraction of its rating. Adjust the band until the cups seal all the way round, and check it again after twenty minutes.\n\nMesh or plastic depends on the job. Mesh does not fog and sheds chippings, and it is what forestry work uses. Plastic gives a solid screen against splash. Neither is eye protection on its own if you are working with chemicals or fine particles.\n\nReplace after an impact. A shell absorbs energy by deforming, and a shell that has done that once has already done its job, whether or not you can see it. Helmets also age: the maker prints a date inside.\n\nStore it out of direct sunlight. UV embrittles a shell over a season, and a brittle shell cracks instead of absorbing.", "llm_summary": "Hard Hat Face Shield sold by Industry Tools Company UK at industrytoolsonline.co.uk. An industrial safety helmet with a face shield and hearing protection on one harness. Mesh and plastic visors, removable earmuffs rated SNR 26 dB by the maker, 52 to 62 cm. Price GBP 59, reference price GBP 79. Product size: 30.5 cm x 23 cm x 16.5 cm. Product weight: 1.2 kg. Colour: Orange. Size: Adult, 52 to 62 cm headband. Hearing protection: SNR 26 dB, stated by the maker. Protective equipment is selected against the hazard and against the standard marked on the product. This listing states the maker's figures and makes no claim about any particular workplace. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/hard-hat-face-shield", "canonical_url": "https://industrytoolsonline.co.uk/hard-hat-face-shield", "json_url": "https://industrytoolsonline.co.uk/api/products/hard-hat-face-shield.json", "updated_at": "2026-09-03", "compare_at_price": 79, "description_text": "The best protective equipment is the equipment that is actually on when the noise starts. That is a comfort and convenience question as much as a specification one. Start with the hazard rather than the product. Falling objects, flying chippings, splash and noise are four different problems, and a combination helmet is worth buying when you have several of them at once. Read the marking on the product itself. Certification is printed on the shell and on the muff cup, and it is the only thing that tells you what a piece of equipment has been tested to. A description in a listing, including this one, is not a certification. Fit is what decides whether hearing protection works. A muff rated in a laboratory and worn over a hood, over glasses arms, or on a loose headband delivers a fraction of its rating. Adjust the band until the cups seal all the way round, and check it again after twenty minutes. Mesh or plastic depends on the job. Mesh does not fog and sheds chippings, and it is what forestry work uses. Plastic gives a solid screen against splash. Neither is eye protection on its own if you are working with chemicals or fine particles. Replace after an impact. A shell absorbs energy by deforming, and a shell that has done that once has already done its job, whether or not you can see it. Helmets also age: the maker prints a date inside. Store it out of direct sunlight. UV embrittles a shell over a season, and a brittle shell cracks instead of absorbing." }, { "id": "noise-cancelling-ear-muffs", "sku": "Noise-Protection-Ear-Muffs", "title": "Noise Protection Ear Muffs", "slug": "noise-cancelling-ear-muffs", "price": 69, "currency": "GBP", "availability": "in_stock", "category": "safety-tools-and-equipment", "category_label": "Safety Tools & Equipment", "tags": [ "ear defenders", "hearing protection", "PPE", "industrial" ], "colors": [], "materials": [ "ABS cups on a wire headband, foam cushions" ], "dimensions": "20.3 cm x 17.8 cm x 12.7 cm", "weight": "Light", "images": [ "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/noise-cancelling-ear-muffs/main-noise-cancelling-ear-muffs.jpeg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/noise-cancelling-ear-muffs/noise-cancelling-ear-muffs-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/noise-cancelling-ear-muffs/noise-cancelling-ear-muffs-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/noise-cancelling-ear-muffs/noise-cancelling-ear-muffs-4.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/noise-cancelling-ear-muffs/noise-cancelling-ear-muffs-5.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/noise-cancelling-ear-muffs/noise-cancelling-ear-muffs-6.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/noise-cancelling-ear-muffs/noise-cancelling-ear-muffs-7.jpeg" ], "description_short": "Low-profile ABS cups on an electrically insulated wire headband, with tilting pivots, replaceable cushions and foam liners, and CSA Class AL.", "description": "A hearing protector's rating is measured on a laboratory head with nothing else on it. Site is not that, and most of the difference is fit.\n\nLook for the seal, not the number. The cushion has to press flat against the skin all the way round the ear. A gap at the jaw, where the cushion crosses the hinge of the glasses or the edge of a hood, is where the noise gets in, and a small gap costs a large part of the rating.\n\nTake the arms into account. Thick glasses arms, a hood seam, a hard hat lug or a lanyard under the cushion all break the seal. Thin-armed safety glasses exist for this reason.\n\nCheck the clamping force. A band that has been stretched, sat on or left over a hook loses its grip, and a muff that slips down through the morning was protecting you at breakfast and not at lunch. The stainless wire inside a good band is there to hold that force steady.\n\nDo not over-protect. It sounds like a strange thing to say, but a protector that is too heavy for the noise leaves the wearer isolated from warnings and machinery, and the usual result is that it comes off. Match the protector to the measured level.\n\nReplace the foam, not the muffs. Cushions harden with sweat and heat and stop sealing long before the cups fail. A hygiene kit is a fraction of the cost of a new pair.\n\nStore them out of the sun and off the floor, with the cushions uncompressed. Foam that has been squashed under a toolbox for a month does not come back.", "llm_summary": "Noise Protection Ear Muffs sold by Industry Tools Company UK at industrytoolsonline.co.uk. Industrial ear defenders with a 31 dB Noise Reduction Rating stated by the maker. Twin insulated headband, tilting ABS earcups, replaceable cushions and foam liners. Price GBP 69, reference price GBP 99. Product dimensions: 20.3 cm x 17.8 cm x 12.7 cm. Noise Reduction Rating: 31 dB NRR, stated by the maker. Classification: CSA Class AL. Colour: Black. Headband: Twin design, electrically insulated wire. Replaceable parts: Ear cushions and foam liners, hygiene kit HYX5. The rating is quoted as NRR, the North American measure. UK noise assessments normally use SNR or octave-band data, so compare the maker's own figures against your assessment. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/noise-cancelling-ear-muffs", "canonical_url": "https://industrytoolsonline.co.uk/noise-cancelling-ear-muffs", "json_url": "https://industrytoolsonline.co.uk/api/products/noise-cancelling-ear-muffs.json", "updated_at": "2026-09-03", "compare_at_price": 99, "description_text": "A hearing protector's rating is measured on a laboratory head with nothing else on it. Site is not that, and most of the difference is fit. Look for the seal, not the number. The cushion has to press flat against the skin all the way round the ear. A gap at the jaw, where the cushion crosses the hinge of the glasses or the edge of a hood, is where the noise gets in, and a small gap costs a large part of the rating. Take the arms into account. Thick glasses arms, a hood seam, a hard hat lug or a lanyard under the cushion all break the seal. Thin-armed safety glasses exist for this reason. Check the clamping force. A band that has been stretched, sat on or left over a hook loses its grip, and a muff that slips down through the morning was protecting you at breakfast and not at lunch. The stainless wire inside a good band is there to hold that force steady. Do not over-protect. It sounds like a strange thing to say, but a protector that is too heavy for the noise leaves the wearer isolated from warnings and machinery, and the usual result is that it comes off. Match the protector to the measured level. Replace the foam, not the muffs. Cushions harden with sweat and heat and stop sealing long before the cups fail. A hygiene kit is a fraction of the cost of a new pair. Store them out of the sun and off the floor, with the cushions uncompressed. Foam that has been squashed under a toolbox for a month does not come back." }, { "id": "portable-medical-kit", "sku": "Large-First-Aid-Cabinet", "title": "Portable Medical Kit", "slug": "portable-medical-kit", "price": 159, "currency": "GBP", "availability": "in_stock", "category": "safety-tools-and-equipment", "category_label": "Safety Tools & Equipment", "tags": [ "first aid", "workplace safety", "cabinet", "PPE" ], "colors": [], "materials": [ "Plastic case with labelled compartments" ], "dimensions": "Wall mountable, with a carry handle", "weight": "Medium", "images": [ "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/portable-medical-kit/main-portable-medical-kit.jpeg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/portable-medical-kit/portable-medical-kit-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/portable-medical-kit/portable-medical-kit-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/portable-medical-kit/portable-medical-kit-4.jpeg" ], "description_short": "A 50-person first aid cabinet with over-the-counter medications, an expansion pocket, a carry handle and wall mounting.", "description": "A first aid cabinet fails quietly. Nobody notices the missing burn dressing until the day it is needed, and the day it is needed is the worst day to find out.\n\nStart with the assessment, not the kit. In Great Britain the Health and Safety (First-Aid) Regulations 1981 put a duty on the employer to assess what is needed: how many people, what hazards, how far from help, how many shifts. A cabinet sized for 50 people answers one of those questions.\n\nThen size the contents to the hazards. A workshop with a grinder wants eye wash. A kitchen wants burn dressings. An office wants very little beyond the basics. Standard kits are a base, and the expansion pocket exists because the base is never quite right.\n\nPut it where it will be found. On a wall, at a marked point, in a room that is not locked out of hours. A kit in a manager's drawer is not provision.\n\nCheck on a schedule and write the check down. Contents disappear one plaster at a time, and expiry dates pass silently. A named person, a monthly date, and a list on the inside of the door is the whole system.\n\nRestock what is gone rather than reordering the whole kit. That is what the indicator and refill system are for, and it is the difference between a cabinet that stays complete and one that gets replaced every two years.\n\nTrain someone. Equipment is the easy half. The regulations expect an appointed person or a qualified first aider depending on the assessment, and the kit does nothing without one.", "llm_summary": "Portable Medical Kit sold by Industry Tools Company UK at industrytoolsonline.co.uk. A wall mountable first aid cabinet with 245 pieces, stated by the maker as sufficient for up to 50 people. Labelled compartments, an expansion pocket, a carrying handle and a restock indicator. Price GBP 159, reference price GBP 199. Contents: 245 pieces including over-the-counter medications. Stated coverage: Up to 50 people, as stated by the maker. Organisation: Clearly labelled compartments. Mounting: Wall or flat vertical surface. Portability: Plastic case with a carrying handle. In Great Britain an employer must assess first aid needs under the Health and Safety (First-Aid) Regulations 1981. This listing states the maker's contents and gives no clinical or treatment advice. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/portable-medical-kit", "canonical_url": "https://industrytoolsonline.co.uk/portable-medical-kit", "json_url": "https://industrytoolsonline.co.uk/api/products/portable-medical-kit.json", "updated_at": "2026-09-03", "compare_at_price": 199, "description_text": "A first aid cabinet fails quietly. Nobody notices the missing burn dressing until the day it is needed, and the day it is needed is the worst day to find out. Start with the assessment, not the kit. In Great Britain the Health and Safety (First-Aid) Regulations 1981 put a duty on the employer to assess what is needed: how many people, what hazards, how far from help, how many shifts. A cabinet sized for 50 people answers one of those questions. Then size the contents to the hazards. A workshop with a grinder wants eye wash. A kitchen wants burn dressings. An office wants very little beyond the basics. Standard kits are a base, and the expansion pocket exists because the base is never quite right. Put it where it will be found. On a wall, at a marked point, in a room that is not locked out of hours. A kit in a manager's drawer is not provision. Check on a schedule and write the check down. Contents disappear one plaster at a time, and expiry dates pass silently. A named person, a monthly date, and a list on the inside of the door is the whole system. Restock what is gone rather than reordering the whole kit. That is what the indicator and refill system are for, and it is the difference between a cabinet that stays complete and one that gets replaced every two years. Train someone. Equipment is the easy half. The regulations expect an appointed person or a qualified first aider depending on the assessment, and the kit does nothing without one." }, { "id": "reusable-half-facepiece-mask", "sku": "Reusable-Respirators-Half-Facepiece", "title": "Reusable Half Facepiece Mask", "slug": "reusable-half-facepiece-mask", "price": 39, "currency": "GBP", "availability": "in_stock", "category": "safety-tools-and-equipment", "category_label": "Safety Tools & Equipment", "tags": [ "respirator", "half mask", "PPE", "dust protection" ], "colors": [], "materials": [ "Silicone facepiece with plastic filter housings" ], "dimensions": "Universal size", "weight": "Light", "images": [ "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/reusable-half-facepiece-mask/main-reusable-half-facepiece-mask.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/reusable-half-facepiece-mask/reusable-half-facepiece-mask-2.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/reusable-half-facepiece-mask/reusable-half-facepiece-mask-3.jpg", "https://industrytoolsonline.co.uk/dropship-images/safety-tools-and-equipment/reusable-half-facepiece-mask/reusable-half-facepiece-mask-4.jpg" ], "description_short": "Dual filtration with four filter layers, universal size, supplied with two filter boxes, two caps, eight cotton filters, safety glasses and earplugs.", "description": "A respirator is the only piece of protective equipment that fails silently. A helmet that is wrong is obvious; a mask that is not sealing feels exactly like one that is.\n\nStart with the substance, not the mask. What is in the air, and what is its exposure limit? Wood dust, silica, weld fume, solvent vapour and isocyanates are five different problems, and the filter class follows from which one you have.\n\nP95, the class here, is particulate. It is for dust, mists and fumes. It is not a vapour cartridge, and the word gas in a product's common name does not change that.\n\nThen the fit. A tight-fitting mask protects to its class only when it seals against skin all the way round. Stubble defeats it. So does a strap over a hood, a mask worn on top of glasses arms, and a facepiece that is the wrong shape for a face.\n\nCheck the seal every time you put it on. Cover the filters, breathe in gently, and the facepiece should pull in and hold. If air comes in, the seal is not made and no filter is helping.\n\nAt work in Great Britain, tight-fitting RPE has to be fit tested for the individual wearer, and that is a legal expectation rather than good practice.\n\nChange filters on the honest signal, which is resistance. When breathing through the mask takes noticeably more effort, the filter is loading up. Damaged or wet filters are changed immediately.\n\nClean and dry the facepiece after use, and store it in a sealed bag rather than on a hook in the workshop. A mask stored in the same air it was protecting you from starts the next day already loaded.", "llm_summary": "Reusable Half Facepiece Mask sold by Industry Tools Company UK at industrytoolsonline.co.uk. A reusable silicone half facepiece respirator with dual P95 filtration. Four filter layers per cartridge, universal size, supplied with filters, caps, glasses and earplugs. Price GBP 39, reference price GBP 59. Filter class: P95. Filtration: Dual filtration, four layers. Size: Universal. Colour: Grey. Facepiece material: Silicone. In the box: 1 face cover, 1 safety glasses, 2 earplugs, 2 filter boxes, 2 caps, 8 cotton filters. P95 is a particulate filter class. Which respirator a task requires is decided by the substance and its exposure limit, and a half mask only performs to its class when it seals to the wearer's face. Delivery across the United Kingdom costs GBP 25 and is free on orders of GBP 100 or more, five to seven days. Express delivery is offered at the checkout for a flat GBP 25 on any order. Nothing on this site is made to a customer's specification, so the full 14 day right to cancel under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 applies. No health, medical or protective outcome is claimed for any product on this site beyond the manufacturer's own stated specifications and standards.", "returnable": true, "return_policy": "Statutory 14-day cancellation right under the Consumer Contracts Regulations 2013, and this shop allows 15 days as its own policy. Sealed food that has been opened cannot be returned (regulation 28(3)(a)). No cancellation fee and no handling fee is charged. Consumer Rights Act 2015 applies to faulty or misdescribed goods.", "shipping_profile": "standard", "warranty": null, "brand": "Industry Tools Company UK", "gtin": null, "mpn": null, "condition": "new", "url": "https://industrytoolsonline.co.uk/reusable-half-facepiece-mask", "canonical_url": "https://industrytoolsonline.co.uk/reusable-half-facepiece-mask", "json_url": "https://industrytoolsonline.co.uk/api/products/reusable-half-facepiece-mask.json", "updated_at": "2026-09-03", "compare_at_price": 59, "description_text": "A respirator is the only piece of protective equipment that fails silently. A helmet that is wrong is obvious; a mask that is not sealing feels exactly like one that is. Start with the substance, not the mask. What is in the air, and what is its exposure limit? Wood dust, silica, weld fume, solvent vapour and isocyanates are five different problems, and the filter class follows from which one you have. P95, the class here, is particulate. It is for dust, mists and fumes. It is not a vapour cartridge, and the word gas in a product's common name does not change that. Then the fit. A tight-fitting mask protects to its class only when it seals against skin all the way round. Stubble defeats it. So does a strap over a hood, a mask worn on top of glasses arms, and a facepiece that is the wrong shape for a face. Check the seal every time you put it on. Cover the filters, breathe in gently, and the facepiece should pull in and hold. If air comes in, the seal is not made and no filter is helping. At work in Great Britain, tight-fitting RPE has to be fit tested for the individual wearer, and that is a legal expectation rather than good practice. Change filters on the honest signal, which is resistance. When breathing through the mask takes noticeably more effort, the filter is loading up. Damaged or wet filters are changed immediately. Clean and dry the facepiece after use, and store it in a sealed bag rather than on a hook in the workshop. A mask stored in the same air it was protecting you from starts the next day already loaded." } ] }